# Vector-U,A,V,RF 
# Tensors-S
# Scalars-PEEQ
def U(displacement,outfile,reop_N):
	#Access Spatial displacement
	fieldValues = displacement.values
	for valueX in fieldValues :
		i = valueX.nodeLabel
		ux = valueX.data[0]
		uy = valueX.data[1]
		uz = valueX.data[2]

	#Spatial displacement, <DataArray>
	outfile.write("<"+"DataArray"+" "+"type="+'"'+"Float32"+'"'+" "+"Name="+'"'+"Spatial_displacement"+'"'+" "+"NumberOfComponents="+'"'+"3"+'"'+" "+"format="+'"'+"ascii"+'"'+">"+'\n')
	for i in reop_N:
		X,Y,Z = ux,uy,uz
		outfile.write('%11.8e'%X+' '+'%11.8e'%Y+' '+'%11.8e'%Z+'\n')
	outfile.write("</DataArray>"+'\n')
	#</DataArray>
def A(acceleration,outfile,reop_N):
	#Access Spatial acceleration
	fieldValues = acceleration.values
	for valueX in fieldValues :
		i = valueX.nodeLabel
		ax = valueX.data[0]
		ay = valueX.data[1]
		az = valueX.data[2]
	#Spatial acceleration, <DataArray>
	outfile.write("<"+"DataArray"+" "+"type="+'"'+"Float32"+'"'+" "+"Name="+'"'+"Spatial_acceleration"+'"'+" "+"NumberOfComponents="+'"'+"3"+'"'+" "+"format="+'"'+"ascii"+'"'+">"+'\n')
	for i in reop_N:
		X,Y,Z = ax,ay,az
		outfile.write('%11.8e'%X+' '+'%11.8e'%Y+' '+'%11.8e'%Z+'\n')
	outfile.write("</DataArray>"+'\n')
	#</DataArray>

def V(velocity,outfile,reop_N):
	#Access Spatial velocity
	fieldValues = velocity.values
	for valueX in fieldValues :
		i = valueX.nodeLabel
		vx = valueX.data[0]
		vy = valueX.data[1]
		vz = valueX.data[2]
	#Spatial velocity, <DataArray>
	outfile.write("<"+"DataArray"+" "+"type="+'"'+"Float32"+'"'+" "+"Name="+'"'+"Spatial_velocity"+'"'+" "+"NumberOfComponents="+'"'+"3"+'"'+" "+"format="+'"'+"ascii"+'"'+">"+'\n')
	for i in reop_N:
		X,Y,Z = vx,vy,vz
		outfile.write('%11.8e'%X+' '+'%11.8e'%Y+' '+'%11.8e'%Z+'\n')
	outfile.write("</DataArray>"+'\n')	
	#</DataArray>

def RF(Reaction_force,outfile,reop_N):
	#Access Reaction force
	fieldValues = Reaction_force.values	
	for valueX in fieldValues :
		i = valueX.nodeLabel
		rfx = valueX.data[0] 
		rfy = valueX.data[1]
		rfz = valueX.data[2]
	#Reaction force
	outfile.write("<"+"DataArray"+" "+"type="+'"'+"Float32"+'"'+" "+"Name="+'"'+"Reaction_force"+'"'+" "+"NumberOfComponents="+'"'+"3"+'"'+" "+"format="+'"'+"ascii"+'"'+">"+'\n')
	for i in reop_N:
		X,Y,Z = rfx,rfy,rfz
		outfile.write('%11.8e'%X+' '+'%11.8e'%Y+' '+'%11.8e'%Z+'\n')
	outfile.write("</DataArray>"+'\n')	
	#</DataArray>

def PEEQ(Equivalent_plastic_strain,outfile,reop_N):
	#Equivalent plastic strain
	node_Equivalent_plastic_strain = Equivalent_plastic_strain.getSubs(position=ELEMENT_NODAL)
	fieldValues = node_Equivalent_plastic_strain.values
	for valueX in fieldValues :
		PEEQ_data= valueX.data
	#Equivalent plastic strain, <DataArray>
	outfile.write("<"+"DataArray"+" "+"type="+'"'+"Float32"+'"'+" "+"Name="+'"'+"Equivalent_plastic_strain"+'"'+" "+"format="+'"'+"ascii"+'"'+">"+'\n')
	for i in reop_N:
		pd = PEEQ_data
		outfile.write('%11.8e'%pd+'\n')
	outfile.write('</DataArray>'+'\n')
	#</DataArray>


def Stress(Stress,outfile,reop_N):
	#access Stress components
	node_Stress = Stress.getSubset(position=ELEMENT_NODAL)
	fieldValues = node_Stress.values
	for valueX in fieldValues :
		s11 = valueX.data[0]
		s22 = valueX.data[1] 
		s33 = valueX.data[2]
		s12 = valueX.data[3]
		s23 = valueX.data[4]
		s13 = valueX.data[5]

		# L1[valueX.nodeLabel-1][7] += valueX.mises
		# L1[valueX.nodeLabel-1][8] += valueX.maxPrincipal
		# L1[valueX.nodeLabel-1][9] += valueX.midPrincipal
		# L1[valueX.nodeLabel-1][10] += valueX.minPrincipal
		# L1[valueX.nodeLabel-1][11] += valueX.press
		# L1[valueX.nodeLabel-1][12] += valueX.tresca
		# L1[valueX.nodeLabel-1][13] += valueX.inv3
	#Stress components, <DataArray>
	outfile.write("<"+"DataArray"+" "+"type="+'"'+"Float32"+'"'+" "+"Name="+'"'+"Stress_Components"+'"'+" "+"NumberOfComponents="+'"'+"9"+'"'+" "+"format="+'"'+"ascii"+'"'+">"+'\n')
	for i in reop_N:
		XX,XY,XZ,YX,YY,YZ,ZX,ZY,ZZ = s11,s12,s13,s12,s22,s23,s13,s23,s33
		outfile.write('%11.8e'%XX+' '+'%11.8e'%XY+' '+'%11.8e'%XZ+' '+'%11.8e'%YX+' '+'%11.8e'%YY+' '+'%11.8e'%YZ+' '+'%11.8e'%ZX+' '+'%11.8e'%ZY+' '+'%11.8e'%ZZ+'\n')
	outfile.write("</DataArray>"+'\n')
	#</DataArray>

def NT11(Temperature,outfile,reop_N):
	#Equivalent plastic strain
	fieldValues = Temperature.values
	for valueX in fieldValues :
		NT11_data= valueX.data
	#Equivalent plastic strain, <DataArray>
	outfile.write("<"+"DataArray"+" "+"type="+'"'+"Float32"+'"'+" "+"Name="+'"'+"Temperature"+'"'+" "+"format="+'"'+"ascii"+'"'+">"+'\n')
	for i in reop_N:
		temp = NT11_data
		outfile.write('%11.8e'%temp+'\n')
	outfile.write('</DataArray>'+'\n')
	#</DataArray>



	# print "Reading U, A, V, RF ......"
	# time1 = time()
	# #Access Spatial displacement
	# displacement = N_Frame.fieldOutputs['U']
	# fieldValues = displacement.values
	# for valueX in fieldValues :
	# 	i = valueX.nodeLabel
	# 	L0[i-1][0] = valueX.data[0]   ux
	# 	L0[i-1][1] = valueX.data[1]   uy
	# 	L0[i-1][2] = valueX.data[2]   uz
	
	# #Access Spatial acceleration
	# acceleration = N_Frame.fieldOutputs['A']
	# fieldValues = acceleration.values
	# for valueX in fieldValues :
	# 	i = valueX.nodeLabel
	# 	L0[i-1][3] = valueX.data[0]   ax
	# 	L0[i-1][4] = valueX.data[1]   ay
	# 	L0[i-1][5] = valueX.data[2]   az
	# #Access Spatial velocity
	# velocity = N_Frame.fieldOutputs['V']
	# fieldValues = velocity.values
	# for valueX in fieldValues :
	# 	i = valueX.nodeLabel
	# 	L0[i-1][6] = valueX.data[0]   vx
	# 	L0[i-1][7] = valueX.data[1]   vy
	# 	L0[i-1][8] = valueX.data[2]   vz
	# #Access Reaction force
	# Reaction_force = N_Frame.fieldOutputs['RF']
	# fieldValues = Reaction_force.values	
	# for valueX in fieldValues :
	# 	i = valueX.nodeLabel
	# 	L0[i-1][9] = valueX.data[0]   rfx
	# 	L0[i-1][10] = valueX.data[1]   rfy
	# 	L0[i-1][11] = valueX.data[2]	rfz
	# print "Time elapsed: ", time() - time1, "s"

	# print "Reading Stress ......"
	# time1 = time()
	# #access Stress components
	# Stress = N_Frame.fieldOutputs['S']
	# node_Stress = Stress.getSubset(position=ELEMENT_NODAL)
	# fieldValues = node_Stress.values
	# for valueX in fieldValues :
	# 	L1[valueX.nodeLabel-1][0] += 1
	# 	L1[valueX.nodeLabel-1][1] += valueX.data[0] s11
	# 	L1[valueX.nodeLabel-1][2] += valueX.data[1] s22
	# 	L1[valueX.nodeLabel-1][3] += valueX.data[2] s33
	# 	L1[valueX.nodeLabel-1][4] += valueX.data[3] s12
	# 	L1[valueX.nodeLabel-1][5] += valueX.data[4] s23
	# 	L1[valueX.nodeLabel-1][6] += valueX.data[5] s13

	# 	L1[valueX.nodeLabel-1][7] += valueX.mises
	# 	L1[valueX.nodeLabel-1][8] += valueX.maxPrincipal
	# 	L1[valueX.nodeLabel-1][9] += valueX.midPrincipal
	# 	L1[valueX.nodeLabel-1][10] += valueX.minPrincipal
	# 	L1[valueX.nodeLabel-1][11] += valueX.press
	# 	L1[valueX.nodeLabel-1][12] += valueX.tresca
	# 	L1[valueX.nodeLabel-1][13] += valueX.inv3
	# # can first ave
	# print "Time elapsed: ", time() - time1, "s"
	
	# print "Reading Equivalent plastic strain ......"
	# time1 = time()
	# #Equivalent plastic strain
	# Equivalent_plastic_strain = N_Frame.fieldOutputs['PEEQ']
	# node_Equivalent_plastic_strain = Equivalent_plastic_strain.getSubset(position=ELEMENT_NODAL)
	# fieldValues = node_Equivalent_plastic_strain.values
	# for valueX in fieldValues :
	# 	L4[valueX.nodeLabel-1][0] += 1
	# 	L4[valueX.nodeLabel-1][1] += valueX.data
	# print "Time elapsed: ", time() - time1, "s"	



# print "Reading Logarithmic strain ......"
	# time1 = time()
	# #Logarithmic strain components
	# Logarithmic_strain = N_Frame.fieldOutputs['LE']
	# node_Logarithmic_strain = Logarithmic_strain.getSubset(position=ELEMENT_NODAL)
	# fieldValues = node_Logarithmic_strain.values
	# for valueX in fieldValues :
	# 	L2[valueX.nodeLabel-1][0] += 1
	# 	L2[valueX.nodeLabel-1][1] += valueX.data[0]
	# 	L2[valueX.nodeLabel-1][2] += valueX.data[1]
	# 	L2[valueX.nodeLabel-1][3] += valueX.data[2]
	# 	L2[valueX.nodeLabel-1][4] += valueX.data[3]
	# 	L2[valueX.nodeLabel-1][5] += valueX.data[4]
	# 	L2[valueX.nodeLabel-1][6] += valueX.data[5]

	# 	L2[valueX.nodeLabel-1][7] += valueX.maxPrincipal
	# 	L2[valueX.nodeLabel-1][8] += valueX.minPrincipal
	# print "Time elapsed: ", time() - time1, "s"
	# print "Reading Plastic strain ......"
	# time1 = time()
	# #Plastic strain components
	# Plastic_strain = N_Frame.fieldOutputs['PE']
	# node_Plastic_strain = Plastic_strain.getSubset(position=ELEMENT_NODAL)
	# fieldValues = node_Plastic_strain.values	
	# for valueX in fieldValues :
	# 	L3[valueX.nodeLabel-1][0] += 1
	# 	L3[valueX.nodeLabel-1][1] += valueX.data[0]
	# 	L3[valueX.nodeLabel-1][2] += valueX.data[1]
	# 	L3[valueX.nodeLabel-1][3] += valueX.data[2]
	# 	L3[valueX.nodeLabel-1][4] += valueX.data[3]
	# 	L3[valueX.nodeLabel-1][5] += valueX.data[4]
	# 	L3[valueX.nodeLabel-1][6] += valueX.data[5]
	
	# 	L3[valueX.nodeLabel-1][7] += valueX.maxPrincipal
	# 	L3[valueX.nodeLabel-1][8] += valueX.minPrincipal
	# print "Time elapsed: ", time() - time1, "s"


	#Logarithmic_strain_Max_Principal, <DataArray>
		# outfile.write("<"+"DataArray"+" "+"type="+'"'+"Float32"+'"'+" "+"Name="+'"'+"Logarithmic_strain_Max_Principal"+'"'+" "+"format="+'"'+"ascii"+'"'+">"+'\n')
		# for i in reop_N:
		# 	k = node[stg_n[i]].label-1
		# 	X = L2[k][7]
		# 	outfile.write('%11.8e'%X+'\n')
		# outfile.write('</DataArray>'+'\n')	
		# #</DataArray>

		# #Logarithmic strain Min.Principal, <DataArray>
		# outfile.write("<"+"DataArray"+" "+"type="+'"'+"Float32"+'"'+" "+"Name="+'"'+"Logarithmic_strain_Min_Principal"+'"'+" "+"format="+'"'+"ascii"+'"'+">"+'\n')
		# for i in reop_N:
		# 	k = node[stg_n[i]].label-1
		# 	X = L2[k][8]
		# 	outfile.write('%11.8e'%X+'\n')
		# outfile.write('</DataArray>'+'\n')	
		# #</DataArray>'''


	#Plastic strain Max.Principal, <DataArray>
		# outfile.write("<"+"DataArray"+" "+"type="+'"'+"Float32"+'"'+" "+"Name="+'"'+"Plastic_strain_Max_Principal"+'"'+" "+"format="+'"'+"ascii"+'"'+">"+'\n')
		# for i in reop_N:
		# 	k = node[stg_n[i]].label-1
		# 	X = L3[k][7]
		# 	outfile.write('%11.8e'%X+'\n')
		# outfile.write('</DataArray>'+'\n')	
		# #</DataArray>

		# #Plastic strain Min.Principal, <DataArray>
		# outfile.write("<"+"DataArray"+" "+"type="+'"'+"Float32"+'"'+" "+"Name="+'"'+"Plastic_strain_Min_Principal"+'"'+" "+"format="+'"'+"ascii"+'"'+">"+'\n')
		# for i in reop_N:
		# 	k = node[stg_n[i]].label-1
		# 	X = L3[k][8]
		# 	outfile.write('%11.8e'%X+'\n')
		# outfile.write('</DataArray>'+'\n')	
		# #</DataArray>


			# #Stress Mises, <DataArray>
	# outfile.write("<"+"DataArray"+" "+"type="+'"'+"Float32"+'"'+" "+"Name="+'"'+"Stress_Mises"+'"'+" "+"format="+'"'+"ascii"+'"'+">"+'\n')
	# for i in reop_N:
	# 	k = node[stg_n[i]].label-1
	# 	X = smises
	# 	outfile.write('%11.8e'%X+'\n')
	# outfile.write('</DataArray>'+'\n')
	# #</DataArray>

	# #Stress Max.Principal, <DataArray>
	# outfile.write("<"+"DataArray"+" "+"type="+'"'+"Float32"+'"'+" "+"Name="+'"'+"Stress_Max_Principal"+'"'+" "+"format="+'"'+"ascii"+'"'+">"+'\n')
	# for i in reop_N:
	# 	k = node[stg_n[i]].label-1
	# 	X = maxPrincipal
	# 	outfile.write('%11.8e'%X+'\n')
	# outfile.write('</DataArray>'+'\n')	
	# #</DataArray>

	# #Stress Mid.Principal, <DataArray>
	# outfile.write("<"+"DataArray"+" "+"type="+'"'+"Float32"+'"'+" "+"Name="+'"'+"Stress_Mid_Principal"+'"'+" "+"format="+'"'+"ascii"+'"'+">"+'\n')
	# for i in reop_N:
	# 	k = node[stg_n[i]].label-1
	# 	X = midPrincipal
	# 	outfile.write('%11.8e'%X+'\n')
	# outfile.write('</DataArray>'+'\n')	
	# #</DataArray>

	# #Stress Min.Principal, <DataArray>
	# outfile.write("<"+"DataArray"+" "+"type="+'"'+"Float32"+'"'+" "+"Name="+'"'+"Stress_Min_Principal"+'"'+" "+"format="+'"'+"ascii"+'"'+">"+'\n')
	# for i in reop_N:
	# 	k = node[stg_n[i]].label-1
	# 	X = minPrincipal
	# 	outfile.write('%11.8e'%X+'\n')
	# outfile.write('</DataArray>'+'\n')	
	# #</DataArray>

	# #Stress Pressure, <DataArray>
	# outfile.write("<"+"DataArray"+" "+"type="+'"'+"Float32"+'"'+" "+"Name="+'"'+"Stress_Pressure"+'"'+" "+"format="+'"'+"ascii"+'"'+">"+'\n')
	# for i in reop_N:
	# 	k = node[stg_n[i]].label-1
	# 	X = press
	# 	outfile.write('%11.8e'%X+'\n')
	# outfile.write('</DataArray>'+'\n')	
	# #</DataArray>

	# #Stress Tresca, <DataArray>
	# outfile.write("<"+"DataArray"+" "+"type="+'"'+"Float32"+'"'+" "+"Name="+'"'+"Stress_Tresca"+'"'+" "+"format="+'"'+"ascii"+'"'+">"+'\n')
	# for i in reop_N:
	# 	k = node[stg_n[i]].label-1
	# 	X = tresca
	# 	outfile.write('%11.8e'%X+'\n')
	# outfile.write('</DataArray>'+'\n')	
	# #</DataArray>

	# #Stress Third_Invariant, <DataArray>
	# outfile.write("<"+"DataArray"+" "+"type="+'"'+"Float32"+'"'+" "+"Name="+'"'+"Stress_Third_Invariant"+'"'+" "+"format="+'"'+"ascii"+'"'+">"+'\n')
	# for i in reop_N:
	# 	k = node[stg_n[i]].label-1
	# 	X = inv3
	# 	outfile.write('%11.8e'%X+'\n')
	# outfile.write('</DataArray>'+'\n')	
	# #</DataArray>